sd卡启动失败,求助...

XFPlus

6月15号2k到了以后一直没空搞。。。最近几天搞了一下发现并不是我能hold住的。。。
拿sd卡按照隔壁@brep 和 @sundm75 的帖子分好区放好文件。。进pmon设置好al1 和 append后发现并不能进去。。
有点凉。。一窍不通，有没有大佬帮忙看一下是啥问题？感激不尽！

看log感觉是initrd没找到然后...然后怎么就重启了呀。。。
Ta就处于这样一个重复循环 load vmlinux 然后重启的过程中
试了一下用u盘发现我的这个u盘甚至读不到 /dev/fs/ext2@usb0/vmlinux  emmm  虽然看devls里面是有usb0的，很心塞

):

这里是log:

1. i2c_send_s addr[0]=0x72, buf[0]=0x0
   
2. addr[0]=0x72                  
   
3. Token is correct!         
   
4. flag is 0x0000000000000000
   
5. AUTO                       
   
6. Press <Enter> to execute loading image:/dev/fs/ext2@sdcard0/vmlinux
   
7. Press any other key to abort.
   
8. 00                        
   
9. rsp cmd_index err,rsp_cmdindex is 0x3f
   
10. cmd 8 timeout              
    
11. |Loading file: /dev/fs/ext2@sdcard0/vmlinux/(elf)
    
12. (elf)                     
    
13. 0x80b10000/3110261 + 0x80e07575/4202539(z) +
    
14. Entry address is 80b1ea90  
    
15. g console=ttyS0,115200 console=tty root=/dev/mmcblk0p2 rootdelay=10 video=ls2k-fb:800x600-16@60
    
16. /tmp/pmon-ls2k/Targets/LS2K/compile/ls2k/../../../../pmon/common/env.c:length of boot_param is 00000090
    
17. ac = 00000008, nsp @ aafffe60, env @ ffffffff, en @ aaffff30
    
18. vsp = 08xffffffffaafffe84, ssp @ 08xffffffffaaffff30
    
19.    zero      at       v0       v1       a0       a1       a2       a3
    
20. 00000000 00000000 00000000 00000000 00000008 aafffe60 aaffff30 8f119be0
    
21.     t0       t1       t2       t3       t4       t5       t6       t7
    
22. 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    
23.     s0       s1       s2       s3       s4       s5       s6       s7
    
24. 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    
25.     t8       t9       k0       k1       gp       sp       s8       ra
    
26. 00000000 00000000 00000000 00000000 00000000 aafffe40 00000000 8f08c0b8
    
27. [    0.000000] Initializing cgroup subsys cpuset
    
28. [    0.000000] Initializing cgroup subsys cpu
    
29. [    0.000000] Initializing cgroup subsys cpuacct
    
30. [    0.000000] Linux version 3.10.84 (fsy@fsy-Lenovo-V2000) (gcc version 4.9.3 20150626 (Red Hat 4.9.3-2) (GCC) ) #69 SMP Wed May 30 15:48:48 CST 2018
    
31. [    0.000000] boot_cpu_id: 0, reserved_cpus_mask: 0
    
32. [    0.000000] nr_cpus_online = 2
    
33. [    0.000000] BIOS loongson_pci_io_base:0x0
    
34. [    0.000000] Shutdown Addr: ffffffff8f065660 Reset Addr: ffffffff8f065678
    
35. [    0.000000] CpuClock = 999980000
    
36. [    0.000000] Debug: uma_vram_addr:0x110000000, uma_vram_size:0x80
    
37. [    0.000000] bootconsole [early0] enabled
    
38. [    0.000000] CPU revision is: 00146103 (Loongson-2K)
    
39. [    0.000000] FPU revision is: 00770501
    
40. [    0.000000] Checking for the multiply/shift bug... no.
    
41. [    0.000000] Checking for the daddiu bug... no.
    
42. [    0.000000] Determined physical RAM map:
    
43. [    0.000000]  memory: 000000000d000000 @ 0000000001000000 (usable)
    
44. [    0.000000]  memory: 0000000068000000 @ 0000000118000000 (usable)
    
45. [    0.000000]  memory: 0000000000002000 @ 000000000fffe000 (reserved)
    
46. [    0.000000]  memory: 00000000008dc000 @ 0000000000200000 (usable)
    
47. [    0.000000]  memory: 0000000000044000 @ 0000000000adc000 (usable after init)
    
48. [    0.000000] Wasting 8192 bytes for tracking 128 unused pages
    
49. <b>[    0.000000] Initrd not found or empty - disabling initrd
    
50. [    0.000000] swiotlb:restricted 32bit dma!</b>
    
51. 
    
52. initserial good ^_^...
    
53. Soft CLK SEL adjust begin
    
54. 10010c85
    
55. MEM        :10010c87
    
56. DC        :W؂؂ЂЂقІЂ
    
57. USE internel SATA ref clock
    

复制代码